Air Agitation Blower:

The Cleantek Ring blower or Aquaculture Air Blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump.

It is also known by other names such as: regenerative blower, Turbine Blower, vortex blower and side-channel blower.

The blower consists of an diecast impeller mounted directly on a motor shaft and is rotated at a high speed, about 2880 RPM.

On the periphery of the impeller are a large number of radial blades. The impeller is positioned between two endplates  with the blades located with a channel on either side.

Manufacturers of ring blower
Bio floc aeration and air agitation blower

As the die-cast impeller rotate and the blades pass the inlet port, a low pressure area is created that draws in air or other gases.

The impeller blades impart motion to the air by centrifugal force, throwing it outward and forward, where it follows the

Contour of the side-channel and is returned to the base, or root, of the impeller. This action is repeated many times, creating a vortex.

Each “regeneration” causes the air to gain pressure until it reaches the portion of the housing where the air is stripped from the impeller and discharged from the blower.

Cleantek blowers are used as Air Agitation Pump for Electroplating bath in lot of Industries in Coimbatore and Chennai. This aquaculture air blower used in various fish pond and Bio floc tank aeration purpose. Our air agitation blower available in 0.25 Hp to 15 Hp capacity.

Showing all 2 results
Sort by
Filter
Clear All