CLEANTEK RING BLOWER are up-to-date blower of which its COMPRESS, HOUSING, IMPELLER and all other parts are die-casting products manufactured with the heat resistant material and precisely gold molded cast. Its exterior is fine and simple in structure thus it went through the precise manufacturing process so it shows superior dispensing pressure and induction power.
When the IMPELLER is turning, the pressure rises by the centrifugal force of the IMPELLER and air comes out from the dispensing hole. Also air is pressed with CASING thus turbulence movements occurs between wings of the IMPELLER. Since this movement is repeated until it reaches the dispensing hole, it is designed in structure so that it could go abreast with the strong induction and dispensing.

 

Description

Ring Blower:

Cleantek Ring blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump. It is also known by other names such as regenerative blower, Turbine Blower, vortex blower and side-channel blower.

Ring Blower working Principle:

Aeration Blower consists of an pressure die-casting impeller mounted directly on a motor shaft and is rotated at a high speed, about 2880 RPM.On the periphery of the impeller is a large number of radial blades. The impeller is positioned between two end plates with the blades located with a channel on either side.

As the die-cast impeller rotate and the blades pass the inlet port, a low pressure area is created that draws in air or other gases.The impeller blades impart motion to the air by centrifugal force, throwing it outward and forward, where it follows the
contour of the side-channel and is returned to the base, or root, of the impeller. This action is repeated many times, creating a vortex.Each “regeneration” causes the air to gain pressure until it reaches the portion of the housing where the air is stripped from the impeller and discharged from the blower.

 

This kind of blowers are used in aeration in water. Here the some description of aeration.Water aeration remove the dissolved gas like carbon dioxide and oxidizes dissolved metal like Iron,Hydrogen sulfide etc..from water. Small bubbles of air create the turbulence action in water so that easily mixed gases are come out from the water. Excessive amount of carbon dioxide make water corrosive and increase the water pureness.Aeration required in sewage treatment plant, Fish pond, Biofloc, Sea food plant, aquarium,Pond aeration, Electro plating plant etc…

 

Ring Blower Applications:

Ring blower is good mechanical equipment supply atmosphere air into water. It is available in various size from supplying airflow from 25 cmh to 1500 cmh capacity and pressure range from 500 mm of wg to 6500 mm of wg. These blowers impellers is in compact size and directly atatched with electric motor. It increase the efficiency of blower compared with belt drive models.Ring blower price is cheaper than other kind of aeration blowers.Small industries can utilze the small models for their aeration purpose.

 

  • Aeration for sewage treatment plant and Effluent Treatment plant
  • Oil free air oxygen supply in aquarium and fish pond and Biofloc
  • Used for air agitation process in electroplating
  • Supply High suction pressure for vacuum conveying system and in pneumatic conveying
  • Handling methane gas for transporting in various methane gas production in food waste
  • Air agitation in swimming pool and water tubs
  • Biogas transportation purpose in biogas production plant

Ring blower are mainly used in aquaculture and sewage treatment applications. Fish,Prawns, Shrimps need to breathe Oxygen in water. Oxygen enter water by surface agitation and Supply air threw pipeline inside water.Sufficient oxygen is required for fishes to live in water.Air blowers will lower CO2 levels through a chemical reaction.Air Blower provide enough oxygen for your aquarium.

Air Agitation Blowers:

In Plating plants and Electroplating industries air agitation is most important process for effective surface coating in work piece.During electro plating process the ring blower air bubbles are produce agitation on work piece so that dust particles are flushed away. This process increase the clean surface area of work piece, further coating process done in high quality. Agitation process assure the mixed chemical solution in proper ratio to achieve the high efficiency of electroplating.We supply good quality energy efficient motor attached high efficiency ring blowers.

 

In sewage Treatment plant ring blower are used  for microbial process. This treatment required medium level of air agitation and aeration to maintain the saturation bio conversion process.Aeration means adding the air into the waste water and it is the key way to achieve the high performance sewage treatment process.In sewage Treatment plant ring blower are used  for microbial process. This treatment required medium level of air agitation and aeration to maintain the saturation of bio conversion process.Aeration means adding the air into the waste water for bacteria survive and it is the key way to achieve the high performance sewage treatment process. Cleantek manufacturing high quality ring blower that produce oil free air for proper aeration in STP. It guarantees economical and effective wastewater treatment process. If you are stopping the air treatment then bacteria die away and the functionality of system stops. So use high quality blower for not stopping aeration in sewage treatment plant.

 

Cleantek Manufacturing two kind of RIng Blower models.

  • Single Stage Ring Blower
  • Double Stage Ring Blower
  • Belt drive Model

 

Technical specifications download here

 

 

Related Blower Products:

Axial Blower

Centrifugal Blower

Belt Drive Centrifugal Blower for air ventilation, Fume Extraction and dust collection

Belt Drive Centrifugal Blower for air ventilation, Fume Extraction and dust collection

 

 

Features

  • Since it is operated without oil, the outgoing air is clear
  • Air flow is continuous without a pulsation
  • Suitable for continuous Running
  • Low maintenance cost
  • Compact Size
  • Available in 230 V / 50 Hz and 415 V / 50 Hz
  • IE2 , IP55 Energy Efficient Induction motor
  • External Bearing increase life
  • Direct drive Induction Motor
  • Powerful Vacuum & Delivery Pressure
  • Low maintenance
  • Motor protected by maintenance free shaft seal
  • High efficiency diecast impeller fans
  • Industrial quality
  • IP55 Protection Motor
  • Fully Copper Winding
  • Compact in size
  • Available in 230 V / 50 Hz and 415 V / 50 Hz also in 60 Hz

Specifications

Applications

  • Air Knife systems
  • Vacuum Holding
  • Dental Suction unit
  • Pneumatic Conveying system
  • Dust Collectors
  • Blow Off or Drying applications
  • Chemical & Plating Tank Agitation
  • Combustion Air Supply
  • Fish Pond Aeration,Fish Farming
  • Industrial Vacuum Cleaners
  • Vacuum Lifting & Hold Down
  • Portable Air Tables
  • ETP & STP air agitation
  • Medical Gloves Checking
  • Vacuum Loaders
  • Electroplating Air Agitation
  • Waste Water Treatment
  • Paper Tim Removal
  • Plastics Dryers
  • Printing Machine Vacuum usage
  • Online Printing Dust Extraction From Paper

Application Fields

  • Sewage and wastewater disposal plant – Aeration tank, cleaning tank
  • Synthetic resin – Cubical transfer of the powder, hopper loader and frame seal
  • Culturing of marine products, fish-farm, live-fish transport vehicle and aquarium.
  • Milking machine for the stock raising use, fermentation device and transfer of feed.
  • Woodworking machine, router machine, sand machine and absorption backing machine
  • Metal manufacturing machine, gilding tank, spray, transfer of material
  • Food manufacturing machine, automatic lining machine, stirring machine and charger
  • Printer and copier, medical devices, sauna, fabric machine, wrapping machine and many more.