Laser Dust Collector

Product Description

Fibre Laser Cutter Dust Collector:

Cleantek is an ISO 9001 – 2015 Certified Company Manufacturing all kind of Fibre Laser Cutter Dust and Fume Extraction system.

 

Cleantek designed new Range of Fibre Laser Dust Collector Suitable for to extract the Dust and Fume from metal cutting laser cutting machines. This unit constructed with Specially designed Direct Drive Suction unit to suck the fine dust and Fume. Heavy Duty Construction assures vibration free  and Maintenance free operations.

Automatic Filter Cleaning unit cleans the filter by pulse pressure to Filter walls. Deposited dust all are fall down in the bottom side collection tank with disposable or reusable Filter bag. Pulse cleaning programmed by latest kind of Digital unit  and its trouble free. Additional compressor tank ensures required compressed air for filter cleaning. German based Filter catridges assure 99.9 % filtration Efficiency.

 

Machine Features:

  • More Filtration Area designed with Air to Cloth Ratio
    High Airflow designed Impeller
    Latest Automatic Filter Cleaning System for Maintaining Machine Performance
    High Suction force
  • IE2 Energy Efficient Motor
  • IP55 rated Continuous running unit
    Efficient Dust Collection
    Easy to Disposal of collection dust
    Low Noise Level with additional Silencer unit
    Heavy Duty Construction
    Maintenance Free unit with digital control Panel
    Supply with High Temperature Hose & Ducting
    All Over India & Abroad Installation Support

 

 

Description

Laser Dust Collector:

Fiber laser metal cutting machine generate melted fine metal Dust, Smoke, and Hazardous Gases, which can be breathing hazards for machine operators and workers inside the factory.

 

Good ventilation or Exhaust unit is required to prevent inhalation of toxic airborne Dust particles, particularly the tiniest particles that can settle deep into lung tissues. It will generate temporary and Permanent health issues to workers. So Dust Collector is necessary to extract the dust and fume.

 

Dust collectors are most commonly used to collect particles at the source. Dust, fumes and smoke are pulled down through the cutting machine and removed through the duct-work where they are filtered through the Catridges type High Efficiency dust collector. The dust collector’s filter cartridges capture and Filter all particles until they can be safely removed from the Dust collection bin.

 

Cleantek designed new Range of Fibre Laser Dust Collector Suitable for to extract the Dust and Fume from metal cutting laser cutting machines. This unit constructed with Specially designed Direct Drive Suction unit to suck the fine dust and Fume. Heavy Duty Construction assures vibration free  and Maintenance free operations. Automatic Filter Cleaning unit cleans the filter by pulse pressure to Filter walls. Deposited dust all are fall down in the bottom side collection tank with disposable or reusable Filter bag. Pulse cleaning programmed by latest kind of Digital unit  and its trouble free. Additional compressor tank ensures required compressed air for filter cleaning. German based Filter catridges assure 99.9 % filtration Efficiency.

 

Machine Features:

  • More Filtration Area designed with Air to Cloth Ratio
  • High Airflow to Extract the Airborne Dust and Fume
  • Latest Automatic Filter Cleaning System for Maintaining Machine Performance
  • High Suction force
  • Efficient Dust Collection
  • Low Noise Level with additional Silencer unit
  • Heavy Duty Construction
  • Supply with High Temperature Hose & Ducting
  • Maintaining Clean and Health Atmosphere & Workplace
  • Filtration Efficiency upto 99 %
  • Improve Productivity & Quality
  • Also used for Plasma Table Dust Collections

 

  • Applications:
  • Laser Cutter Fume & Dust collection
  • Plasma Dust Extraction