- Time : Monday-Saturday 09am-6pm
- (+91) 9994352001
The Cleantek aeration Ring blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump. It is also known by other names such as regenerative blower, Turbine Blower, vortex blower and side-channel blower.
The blower consists of an diecast impeller mounted directly on a motor shaft and is rotated at a high speed, about 2880 RPM. On the periphery of the impeller is a large number of radial blades. The impeller is positioned between two end plates with the blades located with a channel on either side. We are the leading oxygen blower suppliers in Aquaculture. Our Ring Blower system are used to increase the dissolved Oxygen Level in an Lake / Pond Aquaculture units. Our bLowers are Cost Effective and Low maintenance.
Cleantek manufactures ring blowers used for air movement in various industries, including electroplating, fish ponds, STP (Sewage Treatment Plants), and ETP (Effluent Treatment Plants) tanks. In these applications, air movement assists in removing residues such as salts, soaps, or alkaline cleaning agents from metal surfaces. The use of ring blower-generated air movement serves as a mechanical stirring process during product plating, simplifying the agitation of the electrolyte solution.
The Cleantek aeration Ring blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump. It is also known by other names such as: regenerative blower, Turbine Blower, vortex blower and side-channel blower.
Ring blower is good mechanical equipment supply atmosphere air into water. It is available in various size from supplying airflow from 25 CFM to 1500 CFM capacity and pressure range from 500 mm of wg to 6500 mm of wg. These blowers impellers is in compact size and directly attached with electric motor. It increase the efficiency of blower compared with belt drive models.Ring blower price is cheaper than other kind of aeration blowers. Small industries can utilize the small models for their aeration purpose.
The blower consists of an diecast impeller mounted directly on a motor shaft and is rotated at a high speed, about 2880 RPM. On the periphery of the impeller is a large number of radial blades. The impeller is positioned between two endplates with the blades located with a channel on either side. As the diecast impeller rotate and the blades pass the inlet port, a low pressure area is created that draws in air or other gases.
The impeller blades impart motion to the air by centrifugal force, throwing it outward and forward, where it follows the contour of the side-channel and is returned to the base, or root, of the impeller. This action is repeated many times, creating a vortex. Each "regeneration" causes the air to gain pressure until it reaches the portion of the housing where the air is stripped from the impeller and discharged from the blower.
Cleantek ring blowers are an integral part of biofloc aeration systems, providing the necessary airflow to maintain optimal conditions for aquaculture operations. Their efficiency, durability, and low maintenance requirements make them a preferred choice for enhancing biofloc technology in sustainable aquaculture practices.
Cleantek ring blower called in various names like side channel blower, vortex blower, Turbine blower etc… Some of the applications of this blower as following.
Ring Blower are available in single stage (one impeller), double stage (two impeller) configurations. The impeller is directly mounted to the motor shaft, providing powerful force without undue friction. The bearings are outside the air compression chamber, ensuring maximum operational reliability & durability under high differential pressure.
Cleantek Double stage Ring blower is an compact and direct drive air blower model used in various suction and pressure applications. It is produced in single impeller fan and double impeller fan design to increase the delivery pressure. To achieve high efficiency electric motor and blower impeller is directly fitted. This ring blower available in regular IE2, IE3, IP55 protection, Belt drive and IP65 Explosion proof versions.
We are the leading oxygen blower suppliers in Aquaculture. Our Ring Blower system are used to increase the dissolved Oxygen Level in an Lake / Pond Aquaculture units. Our bLowers are Cost Effective and Low maintenance.
Single stage models used for High volume and medium pressure applications like aeration upto 3 meter water height. Double stage Blowers are used for Less Volume with high pressure applications like Sewage water Treatment. Oxygen transfer efficiency increases in diffused-air aeration systems with tank depth and the amount of time the air bubbles remain in the water column. As a result, diffused-air aeration systems are more efficient in deeper water than in shallow ponds.
Diffuser systems work primarily by moving deeper waters to the surface and creating a constant mixing or destratifying effect. Secondarily, oxygen is transferred into the water column as the air bubbles rise to the surface. By keeping the pond water constantly mixed, a diffused air system may prevent low dissolved-oxygen emergencies from occurring.
