During grinding and deburring process dust is produced and it harmful and dangerous, and its requiring an effective dust collection system.
Cleantek Manufacturing aquaculture air blowers for pond aeration in fish farms. Our Blowers are oil free and
supply high volume air supply comparing the other vacuum pumps and compressors.Oxygen is must for fish alive, So our side channel
blowers mostly used in fish farms, all kind of aqua farms, Sea Foods manufacturing plants. Various sizes of diffusers are used to
with our blowers.
- 100% oil free and Insulation class is F,
- Continuous duty and Protection class is IP55.
- Various Frequency 50 HZ & 60 HZ are available
- Made of die cast aluminum
- Both usage of Compressor and Vacuum (suction and blow).
- Virtually maintenance free, with SKF Double sealed long life bearings.
- Smart Compact design and Low noise Level
- ATEX Explosion Proof Motor & Belt Drive is available
- Anti corrosion blower and special color also available
Read more details
Cleantek manufacturing Rubber Dust Collector for various kind of process like Rubber Blending, Rubber Grinding, Rubber Cutting, Rubber Polishing process.
During this Process lot of fine carbon Dust are generated and it is very dangerous to workers Health. This Dust to be extracted away from the workers breathing zone. If not this dust flying all over the factory and floating in the atmosphere . Further it is deposited in walls , machines, etc…
The Cleantek Ring blower is a non-positive displacement, high volume, low pressure blower that can operate as either a compressor or a vacuum pump. It is also known by other names such as: regenerative blower, Turbine Blower, vortex blower and side-channel blower.
The blower consists of an diecast impeller mounted directly on a motor shaft and is rotated at a high speed, about 2880 RPM. On the periphery of the impeller is a large number of radial blades. The impeller is positioned between two end plates with the blades located with a channel on either side.
As the diecast impeller rotate and the blades pass the inlet port, a low pressure area is created that draws in air or other gases. The impeller blades impart motion to the air by centrifugal force, throwing it outward and forward, where it follows the contour of the side-channel and is returned to the base, or root, of the impeller. This action is repeated many times, creating a vortex. Each “regeneration” causes the air to gain pressure until it reaches the portion of the housing where the air is stripped from the impeller and discharged from the blower.
Cleantek manufacturing air agitation blower for Electroplating process, Metal coating process, Aquaculture , Etc… Various airflow capacity and pressure ranges available in our blowers.
Ring Blower are available in single stage (one impeller), double stage (two impeller) configurations. The impeller is directly mounted to the motor shaft, providing powerful force without undue friction. The bearings are outside the air compression chamber, ensuring maximum operational reliability & durability under high differential pressure.
Cleantek Manufacturing turbine blower in various airflow and pressure capacity.
This Turbine / ring blower available is 2 different designs.
- Single stage Turbine Blower
- Double Stage Ring Blower
Our Turbine Blower models available in 45 cmh to 1500 cmh airflow capacity.
- STP & ETP air supply
- Any air agitation
- Ballon & Gloves testing
- Spa Air Supply
- Methane Air supply etc…
The high pressure ring Blowers are widely used on : Pneumatic conveying systems / Sewage Treatment plant / Textile machines / Printing machines / PCB process / Dust collection / Fish ponds
/ SPA / Dental suction devices / Paper sorting and delivery / Lifting and holding / Packaging machines etc…
Manufcatured with excellent features on mechanic strengthand,durability,light weight and smooth exterior.
IP 55 Protection
Low Noise Level
Full Copper winding
IP55 Protection Level
Flame Proof Version / Belt Drive Version available on request
Dust Extraction system for Dust Control in your IndustryContinue reading...
Cleantek Manufacturing Welding Fume Extractor, Dust Collector, Air Blowers, Mist Collector etc…Continue reading...
How Paint Booth Working ?
The Excess-sprayed solvent and paint particles will be sucked together with the exhausted air.
The filtering of the air happens by means of the special paper labyrinth paper filter. Approximately 90-95 % of the excess-sprayed paint is adhering on this filter.
Cleantek Dry type spray booth is an enclosed workstation designed for the capture of aerosol and spray paint Over spray and fine mist fumes. The system filters overspray using a paint arrestance prefilter and exhausts harmful VOC fumes outside to protect operators. Dry type models used in Common applications included Pumps, motors, valves, gear boxes, toys mfg, manufacturing coatings and other airborne fume applications.
If you are inhaled paint fumes, then you might suffer from the following symptoms:
Headaches & Dizziness
Difficulty in speaking & Vision
Weakness & Sick
It is advised to paint with good ventilation paint booth to make sure the circulation of fresh air also wear the masks while painting or around the areas being painted.In all industry maintaining a clean workplace may help keep work members safe, healthy and efficient.